Red Yamaha Wave Runner
This was a very extensive repair: the water intake plate had been ripped out of the jet ski, causing very serious damage along the hull of this Yamaha Wave Runner jet-ski. We had to cut out all around the damaged area. We applied a thick layer of fiberglass on the inside to reinforce it, then fiberglassed the outside, and gel-coated it. Then color-matched it and finished it to factory specs. We warranty our fiberglass repairs and paint work.
White 2021 Stingray Bow Rider
The starboard side of this Stingray boat had received extensive damage. Repairing the fiberglass required removing the ski tower. After we reinforced the hull extensively on the inside, we repaired the fiberglass on the outside. We ground it, gel-coated it, and repainted it to a factory color-matched finish. We then re-attached the ski tower. We warranty our fiberglass repair work and paint job.
Black Yamaha Wave Runner
The bottom of the hull has been ripped open. We had to fiberglass the bottom back together and reinforce it because of so much damage. Then we repair the fiberglass on the outside, ground it to a smooth finish, gel-coated the bottom, repainted it and wet sanded and buffed it to a factory finish. Our fiberglass repair work and paint job are warrantied.
Purple Sea-Doo Jet-ski
A rock had punched a big hole in the fiberglass hull of this watercraft. We cut out the damaged fiberglass, reinforced it on the inside, applied fiberglass outside, ground it, gel-coated and prepped it for paint, painted it, and wet-sanded and buffed it to factory color specs. This Sea-Doo watercraft now looks brand-new. Our fiberglass work and paint job are warrantied.
Grey Orange Sea-Doo Rotax
This watercraft had received a beating, with long, nasty cracks on the port side. We cut out all the damaged fiberglass, reinforced it from the inside out, sprayed new gel coat on it, then color-matched it and replaced the decals. Looking great now! Our fiberglass repair work and paint job are warrantied.
Blue 2016 Yamaha Wave Runner
The bottom of the hull of this Yamaha Wave Runner watercraft had been damaged in 15 different spots. We did all the necessary fiberglass repairs. Then gel-coated and repainted the hull with a factory specs paint for a perfect color match. This watercraft looks brand-new again. Our fiberglass repair work and paint job are warrantied.
Black & Yellow Sea-Doo
This Sea-Doo has a composite hull. It had been mauled and needed repairs. We used a bonding agent specifically made for this type of hull and reinforced it internally. We then did the outside repairs and finished with a factory specs paint for a perfect color-match. As usual, our fiberglass repair work and paint job are warrantied.
Yamaha Wave Runner 7301
The starboard side of this Wave Runner jet-ski had suffered extensive damage. We cut out all the damaged area and laid 5 layers of fiberglass. We used 1.5lb fiberglass with resin to restructure and reinforce the hull. Then we added gel-coat and ground it out to a smooth finish. We prepped up the surface for the factory color-match paint with a pearl coat, then wet-sanded and buffed to a factory finish like no accident ever happened. We perform this type of extensive repair routinely. We warranty our fiberglass repair work and paint job.
